High Pressure Washer Water Pump 3000 PSI WARRANTY M. U

  

Are you tired of scrubbing and spend a lot of time cleaning the terrace and sidewalk? 3000 psi high pressure gasoline pump is durable and reliable.

It replaces the original tools and is specially used for car washing, field cleaning, solid moss and other scenes. Meet your daily cleaning needs, save your time and energy, and make your life easier. Tips: Please do not use this product without water! Please note the following dimensions: Pump Inlet Size: Garden Quick Release Plug Pump Outlet Size: M221.5-14 Features:?

Fan shaped structure, the pump body is more solid and durable, and the pressure is stronger? 3/4 water inlet garden joint with filter screen to extend the service life of the pump? Equipped with thermal protection valve to avoid damage to accessories due to high temperature? The rated pressure is 200bar/3000psi? Suitable for 5.5hp/6.5hp/7hp most pressure cleaning machines?

Black oxide wraps the surface, which can effectively prevent dirt and wear. Equipped with 6 pump valves Specification: pump- Horizontal Pressure: 150-200bar/2200PSI-3000PSI Flow Rate: 9lpm/2.4gpm Drive: Engine Engine: 5.5hp/6.5hp/7hp Pump Head: Aluminum Hollow shaft: 19.05mm Keyway: 4.78mm Pump Inlet Size: Garden Quick Release Plug Pump Outlet Size: M221.5-14 Packing : 270260180 GW:3.2KG NW:3KG How to Install and Use Our Horizontal/Vertical Pressure Washer Pump 1.

Using the Allen wrench, loosen the bolts on the top of the pump. Lightly rock the head back the forth to pull the pump of the engine shaft. It maybe seized to the shaft, so if it is try some penetrating oil. After allowing the penetrating oil to do its job gently pry the pump loose or use a bearing puller to pull it off. Watch for the key falling out sine you will need it to install the new pump.

Clean the shaft with emery clot then apply a light coating of anti-seize or oil on it. Using a bit of grease, "glue" the key in the engine shaft keyway to help keep it in place.

Slide the new pump on the shaft ensuring the key stays in place 7. Turn the pump to match the pump bolt holes to the engine bolt holes. Install and tighten the bolts to secure the pump to the engine. Connect your hose and as usual have a try.

Package Included: 1Pressure Washer Pump 1Pipette. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Pressure Washers". The seller is "huseta" and is located in this country: AU. This item can be shipped worldwide.

1. Brand: Unbranded
2. Type: PRESSURE WASHER ACCESSORIES
3. Keyway: 4.78mm
4. Pressure: 150-200bar/2200PSI-3000PSI
5. Pump Head: Aluminum